5.0 How to Connect in USB Mode

USB Mode will allow SkyTrak Launch Monitor to connect to your PC/Laptop without needing a Network that can sync your data automatically. 

NOTE: USB mode is not available for MacOS or iOS devices.

The following steps need to be done with your SkyTrak Launch Monitor OFF:

   *Please use the cable that came with your SkyTrak Launch Monitor or a data transmitter.

Original SkyTrak

  1. The micro-USB ends go into the SkyTrak, bellow the power button, the USB portion going into your device.
  2. Once they have been connected you will notice the bottom light in your device turn yellow, this is normal.


SkyTrak Plus:

NOTE: At the end of a session in USB mode, the cable must be switched to the two-ended USB-C to USB-C cable for an overnight charge. The splitter cable may not charge the unit completely overnight. 

1: Plug SkyTrak + splitter cable into SkyTrak + underneath the dust cover. 


 

2: Plug the "Power only" USB-C cable into the provided AC power adapter. Wait for Yellow/Amber power light. 

            


3: Power on SkyTrak +. Wait for Green/Red/Red (VERY IMPORTANT TO POWER ON FIRST BEFORE MOVING TO STEP 4) 


4: Plug "PC' USB-A cable into your PC.  

5. Once you log in, your SkyTrak + will automatically connect to the SkyTrak software and will show the following.

(Green/Green/Red) = Checking License Files

(Green/Green/Green) = Connected