Skip to content
English
Visit skytrakgolf.com
  • There are no suggestions because the search field is empty.

How to Reset your Original SkyTrak Launch Monitor

There may come a time where your SkyTrak Launch Monitor needs to be reset in order to help resolve an assortment of issues. Please view the following instructions to assist you in performing a reset of your SkyTrak Launch Monitor

*NOTE: If you're using a SkyTrak+ unit, please refer to these instructions

1. Power on your SkyTrak Launch Monitor.

2. Please locate the soft-black plug that is on the bottom of your SkyTrak Launch Monitor

 

 

3. Remove the plug to reveal the pin-sized button

 

 

4. Use a small paper clip or pin to gently press the button while the unit is powered on, but NOT connected to the software. The LEDs should be green-red-red or green-yellow-red, all solid. Hold down until all LED lights turn yellow. You should feel a click when the button has been depressed.

5. Once the reset is complete, your SkyTrak Launch Monitor has been reset.

6. The 'Power' LED should be green and the 'Wi-Fi' and 'Ready' LED should be red.